Auto Enamel Mixon Metallic

1K basecoat with a metallic effect.

The basecoat is covered with 2K acrylic clear coat MIXON, providing a high-gloss, mechanically and chemically resistant final finish.

Before application

Mix thoroughly

Dilution

Mixon 780: 50%

Spray viscosity Din4/20°C

20-22 sec.

Applied

2-3 layers; nozzle diameter 1.3-1.4; pressure 3-4 bar

Interval between layers

5-10 min. at 20°С

Drying time 20°С

30 min.

Фото

Surface preparation:

If necessary, level the surface with Mixon putty. Sand the puttyed surface with abrasive paper P80-150. Next, a Mixon primer from the Car Refinish or Silver Line series must be applied to the puttyed surface. Grind the surface of the primer with abrasive paper P320-400 «on dry» or P600-1000 «on wet».
Clean the thoroughly polished surface of the primer, Degrease with silicone washing Mixon 770 and dry.

Diluent:

Add to 50% Mixon 780 diluent.

Drying time:

At 20°С: from dust 5-10 minutes, for sticking 15-20 minutes, complete drying of 30 minutes.

Instructions for use:

Adhering to the proportions, mix the components to a uniform consistency. Apply in 2 full layers with a gun with a nozzle diameter of 1.3-1.4 mm under a pressure of 3-4 bar with an interval between layers of 5-10 minutes. Spray viscosity 20-22 sec. DIN 4 at 20°С.

Storage conditions and time:

Store in a cool, dry place, away from heat sources. Avoid direct sunlight. The shelf life is 24 months at a temperature of 20°C.